// Copyright 2019+ Klaus Post. All rights reserved. // License information can be found in the LICENSE file. // Based on work by Yann Collet, released under BSD License. package zstd import ( "bytes" "fmt" "github.com/klauspost/compress" ) const ( bestLongTableBits = 22 // Bits used in the long match table bestLongTableSize = 1 << bestLongTableBits // Size of the table bestLongLen = 8 // Bytes used for table hash // Note: Increasing the short table bits or making the hash shorter // can actually lead to compression degradation since it will 'steal' more from the // long match table and match offsets are quite big. // This greatly depends on the type of input. bestShortTableBits = 18 // Bits used in the short match table bestShortTableSize = 1 << bestShortTableBits // Size of the table bestShortLen = 4 // Bytes used for table hash ) type match struct { offset int32 s int32 length int32 rep int32 est int32 } const highScore = maxMatchLen * 8 // estBits will estimate output bits from predefined tables. func (m *match) estBits(bitsPerByte int32) { mlc := mlCode(uint32(m.length - zstdMinMatch)) var ofc uint8 if m.rep < 0 { ofc = ofCode(uint32(m.s-m.offset) + 3) } else { ofc = ofCode(uint32(m.rep)) } // Cost, excluding ofTT, mlTT := fsePredefEnc[tableOffsets].ct.symbolTT[ofc], fsePredefEnc[tableMatchLengths].ct.symbolTT[mlc] // Add cost of match encoding... m.est = int32(ofTT.outBits + mlTT.outBits) m.est += int32(ofTT.deltaNbBits>>16 + mlTT.deltaNbBits>>16) // Subtract savings compared to literal encoding... m.est -= (m.length * bitsPerByte) >> 10 if m.est > 0 { // Unlikely gain.. m.length = 0 m.est = highScore } } // bestFastEncoder uses 2 tables, one for short matches (5 bytes) and one for long matches. // The long match table contains the previous entry with the same hash, // effectively making it a "chain" of length 2. // When we find a long match we choose between the two values and select the longest. // When we find a short match, after checking the long, we check if we can find a long at n+1 // and that it is longer (lazy matching). type bestFastEncoder struct { fastBase table [bestShortTableSize]prevEntry longTable [bestLongTableSize]prevEntry dictTable []prevEntry dictLongTable []prevEntry } // Encode improves compression... func (e *bestFastEncoder) Encode(blk *blockEnc, src []byte) { const ( // Input margin is the number of bytes we read (8) // and the maximum we will read ahead (2) inputMargin = 8 + 4 minNonLiteralBlockSize = 16 ) // Protect against e.cur wraparound. for e.cur >= e.bufferReset-int32(len(e.hist)) { if len(e.hist) == 0 { e.table = [bestShortTableSize]prevEntry{} e.longTable = [bestLongTableSize]prevEntry{} e.cur = e.maxMatchOff break } // Shift down everything in the table that isn't already too far away. minOff := e.cur + int32(len(e.hist)) - e.maxMatchOff for i := range e.table[:] { v := e.table[i].offset v2 := e.table[i].prev if v < minOff { v = 0 v2 = 0 } else { v = v - e.cur + e.maxMatchOff if v2 < minOff { v2 = 0 } else { v2 = v2 - e.cur + e.maxMatchOff } } e.table[i] = prevEntry{ offset: v, prev: v2, } } for i := range e.longTable[:] { v := e.longTable[i].offset v2 := e.longTable[i].prev if v < minOff { v = 0 v2 = 0 } else { v = v - e.cur + e.maxMatchOff if v2 < minOff { v2 = 0 } else { v2 = v2 - e.cur + e.maxMatchOff } } e.longTable[i] = prevEntry{ offset: v, prev: v2, } } e.cur = e.maxMatchOff break } s := e.addBlock(src) blk.size = len(src) if len(src) < minNonLiteralBlockSize { blk.extraLits = len(src) blk.literals = blk.literals[:len(src)] copy(blk.literals, src) return } // Use this to estimate literal cost. // Scaled by 10 bits. bitsPerByte := int32((compress.ShannonEntropyBits(src) * 1024) / len(src)) // Huffman can never go < 1 bit/byte if bitsPerByte < 1024 { bitsPerByte = 1024 } // Override src src = e.hist sLimit := int32(len(src)) - inputMargin const kSearchStrength = 10 // nextEmit is where in src the next emitLiteral should start from. nextEmit := s // Relative offsets offset1 := int32(blk.recentOffsets[0]) offset2 := int32(blk.recentOffsets[1]) offset3 := int32(blk.recentOffsets[2]) addLiterals := func(s *seq, until int32) { if until == nextEmit { return } blk.literals = append(blk.literals, src[nextEmit:until]...) s.litLen = uint32(until - nextEmit) } if debugEncoder { println("recent offsets:", blk.recentOffsets) } encodeLoop: for { // We allow the encoder to optionally turn off repeat offsets across blocks canRepeat := len(blk.sequences) > 2 if debugAsserts && canRepeat && offset1 == 0 { panic("offset0 was 0") } const goodEnough = 250 cv := load6432(src, s) nextHashL := hashLen(cv, bestLongTableBits, bestLongLen) nextHashS := hashLen(cv, bestShortTableBits, bestShortLen) candidateL := e.longTable[nextHashL] candidateS := e.table[nextHashS] // Set m to a match at offset if it looks like that will improve compression. improve := func(m *match, offset int32, s int32, first uint32, rep int32) { if s-offset >= e.maxMatchOff || load3232(src, offset) != first { return } if debugAsserts { if offset <= 0 { panic(offset) } if !bytes.Equal(src[s:s+4], src[offset:offset+4]) { panic(fmt.Sprintf("first match mismatch: %v != %v, first: %08x", src[s:s+4], src[offset:offset+4], first)) } } // Try to quick reject if we already have a long match. if m.length > 16 { left := len(src) - int(m.s+m.length) // If we are too close to the end, keep as is. if left <= 0 { return } checkLen := m.length - (s - m.s) - 8 if left > 2 && checkLen > 4 { // Check 4 bytes, 4 bytes from the end of the current match. a := load3232(src, offset+checkLen) b := load3232(src, s+checkLen) if a != b { return } } } l := 4 + e.matchlen(s+4, offset+4, src) if rep < 0 { // Extend candidate match backwards as far as possible. tMin := s - e.maxMatchOff if tMin < 0 { tMin = 0 } for offset > tMin && s > nextEmit && src[offset-1] == src[s-1] && l < maxMatchLength { s-- offset-- l++ } } cand := match{offset: offset, s: s, length: l, rep: rep} cand.estBits(bitsPerByte) if m.est >= highScore || cand.est-m.est+(cand.s-m.s)*bitsPerByte>>10 < 0 { *m = cand } } best := match{s: s, est: highScore} improve(&best, candidateL.offset-e.cur, s, uint32(cv), -1) improve(&best, candidateL.prev-e.cur, s, uint32(cv), -1) improve(&best, candidateS.offset-e.cur, s, uint32(cv), -1) improve(&best, candidateS.prev-e.cur, s, uint32(cv), -1) if canRepeat && best.length < goodEnough { if s == nextEmit { // Check repeats straight after a match. improve(&best, s-offset2, s, uint32(cv), 1|4) improve(&best, s-offset3, s, uint32(cv), 2|4) if offset1 > 1 { improve(&best, s-(offset1-1), s, uint32(cv), 3|4) } } // If either no match or a non-repeat match, check at + 1 if best.rep <= 0 { cv32 := uint32(cv >> 8) spp := s + 1 improve(&best, spp-offset1, spp, cv32, 1) improve(&best, spp-offset2, spp, cv32, 2) improve(&best, spp-offset3, spp, cv32, 3) if best.rep < 0 { cv32 = uint32(cv >> 24) spp += 2 improve(&best, spp-offset1, spp, cv32, 1) improve(&best, spp-offset2, spp, cv32, 2) improve(&best, spp-offset3, spp, cv32, 3) } } } // Load next and check... e.longTable[nextHashL] = prevEntry{offset: s + e.cur, prev: candidateL.offset} e.table[nextHashS] = prevEntry{offset: s + e.cur, prev: candidateS.offset} // Look far ahead, unless we have a really long match already... if best.length < goodEnough { // No match found, move forward on input, no need to check forward... if best.length < 4 { s += 1 + (s-nextEmit)>>(kSearchStrength-1) if s >= sLimit { break encodeLoop } continue } candidateS = e.table[hashLen(cv>>8, bestShortTableBits, bestShortLen)] cv = load6432(src, s+1) cv2 := load6432(src, s+2) candidateL = e.longTable[hashLen(cv, bestLongTableBits, bestLongLen)] candidateL2 := e.longTable[hashLen(cv2, bestLongTableBits, bestLongLen)] // Short at s+1 improve(&best, candidateS.offset-e.cur, s+1, uint32(cv), -1) // Long at s+1, s+2 improve(&best, candidateL.offset-e.cur, s+1, uint32(cv), -1) improve(&best, candidateL.prev-e.cur, s+1, uint32(cv), -1) improve(&best, candidateL2.offset-e.cur, s+2, uint32(cv2), -1) improve(&best, candidateL2.prev-e.cur, s+2, uint32(cv2), -1) if false { // Short at s+3. // Too often worse... improve(&best, e.table[hashLen(cv2>>8, bestShortTableBits, bestShortLen)].offset-e.cur, s+3, uint32(cv2>>8), -1) } // Start check at a fixed offset to allow for a few mismatches. // For this compression level 2 yields the best results. // We cannot do this if we have already indexed this position. const skipBeginning = 2 if best.s > s-skipBeginning { // See if we can find a better match by checking where the current best ends. // Use that offset to see if we can find a better full match. if sAt := best.s + best.length; sAt < sLimit { nextHashL := hashLen(load6432(src, sAt), bestLongTableBits, bestLongLen) candidateEnd := e.longTable[nextHashL] if off := candidateEnd.offset - e.cur - best.length + skipBeginning; off >= 0 { improve(&best, off, best.s+skipBeginning, load3232(src, best.s+skipBeginning), -1) if off := candidateEnd.prev - e.cur - best.length + skipBeginning; off >= 0 { improve(&best, off, best.s+skipBeginning, load3232(src, best.s+skipBeginning), -1) } } } } } if debugAsserts { if !bytes.Equal(src[best.s:best.s+best.length], src[best.offset:best.offset+best.length]) { panic(fmt.Sprintf("match mismatch: %v != %v", src[best.s:best.s+best.length], src[best.offset:best.offset+best.length])) } } // We have a match, we can store the forward value if best.rep > 0 { var seq seq seq.matchLen = uint32(best.length - zstdMinMatch) if debugAsserts && s <= nextEmit { panic("s <= nextEmit") } addLiterals(&seq, best.s) // Repeat. If bit 4 is set, this is a non-lit repeat. seq.offset = uint32(best.rep & 3) if debugSequences { println("repeat sequence", seq, "next s:", s) } blk.sequences = append(blk.sequences, seq) // Index old s + 1 -> s - 1 index0 := s + 1 s = best.s + best.length nextEmit = s if s >= sLimit { if debugEncoder { println("repeat ended", s, best.length) } break encodeLoop } // Index skipped... off := index0 + e.cur for index0 < s { cv0 := load6432(src, index0) h0 := hashLen(cv0, bestLongTableBits, bestLongLen) h1 := hashLen(cv0, bestShortTableBits, bestShortLen) e.longTable[h0] = prevEntry{offset: off, prev: e.longTable[h0].offset} e.table[h1] = prevEntry{offset: off, prev: e.table[h1].offset} off++ index0++ } switch best.rep { case 2, 4 | 1: offset1, offset2 = offset2, offset1 case 3, 4 | 2: offset1, offset2, offset3 = offset3, offset1, offset2 case 4 | 3: offset1, offset2, offset3 = offset1-1, offset1, offset2 } continue } // A 4-byte match has been found. Update recent offsets. // We'll later see if more than 4 bytes. index0 := s + 1 s = best.s t := best.offset offset1, offset2, offset3 = s-t, offset1, offset2 if debugAsserts && s <= t { panic(fmt.Sprintf("s (%d) <= t (%d)", s, t)) } if debugAsserts && int(offset1) > len(src) { panic("invalid offset") } // Write our sequence var seq seq l := best.length seq.litLen = uint32(s - nextEmit) seq.matchLen = uint32(l - zstdMinMatch) if seq.litLen > 0 { blk.literals = append(blk.literals, src[nextEmit:s]...) } seq.offset = uint32(s-t) + 3 s += l if debugSequences { println("sequence", seq, "next s:", s) } blk.sequences = append(blk.sequences, seq) nextEmit = s if s >= sLimit { break encodeLoop } // Index old s + 1 -> s - 1 for index0 < s { cv0 := load6432(src, index0) h0 := hashLen(cv0, bestLongTableBits, bestLongLen) h1 := hashLen(cv0, bestShortTableBits, bestShortLen) off := index0 + e.cur e.longTable[h0] = prevEntry{offset: off, prev: e.longTable[h0].offset} e.table[h1] = prevEntry{offset: off, prev: e.table[h1].offset} index0++ } } if int(nextEmit) < len(src) { blk.literals = append(blk.literals, src[nextEmit:]...) blk.extraLits = len(src) - int(nextEmit) } blk.recentOffsets[0] = uint32(offset1) blk.recentOffsets[1] = uint32(offset2) blk.recentOffsets[2] = uint32(offset3) if debugEncoder { println("returning, recent offsets:", blk.recentOffsets, "extra literals:", blk.extraLits) } } // EncodeNoHist will encode a block with no history and no following blocks. // Most notable difference is that src will not be copied for history and // we do not need to check for max match length. func (e *bestFastEncoder) EncodeNoHist(blk *blockEnc, src []byte) { e.ensureHist(len(src)) e.Encode(blk, src) } // Reset will reset and set a dictionary if not nil func (e *bestFastEncoder) Reset(d *dict, singleBlock bool) { e.resetBase(d, singleBlock) if d == nil { return } // Init or copy dict table if len(e.dictTable) != len(e.table) || d.id != e.lastDictID { if len(e.dictTable) != len(e.table) { e.dictTable = make([]prevEntry, len(e.table)) } end := int32(len(d.content)) - 8 + e.maxMatchOff for i := e.maxMatchOff; i < end; i += 4 { const hashLog = bestShortTableBits cv := load6432(d.content, i-e.maxMatchOff) nextHash := hashLen(cv, hashLog, bestShortLen) // 0 -> 4 nextHash1 := hashLen(cv>>8, hashLog, bestShortLen) // 1 -> 5 nextHash2 := hashLen(cv>>16, hashLog, bestShortLen) // 2 -> 6 nextHash3 := hashLen(cv>>24, hashLog, bestShortLen) // 3 -> 7 e.dictTable[nextHash] = prevEntry{ prev: e.dictTable[nextHash].offset, offset: i, } e.dictTable[nextHash1] = prevEntry{ prev: e.dictTable[nextHash1].offset, offset: i + 1, } e.dictTable[nextHash2] = prevEntry{ prev: e.dictTable[nextHash2].offset, offset: i + 2, } e.dictTable[nextHash3] = prevEntry{ prev: e.dictTable[nextHash3].offset, offset: i + 3, } } e.lastDictID = d.id } // Init or copy dict table if len(e.dictLongTable) != len(e.longTable) || d.id != e.lastDictID { if len(e.dictLongTable) != len(e.longTable) { e.dictLongTable = make([]prevEntry, len(e.longTable)) } if len(d.content) >= 8 { cv := load6432(d.content, 0) h := hashLen(cv, bestLongTableBits, bestLongLen) e.dictLongTable[h] = prevEntry{ offset: e.maxMatchOff, prev: e.dictLongTable[h].offset, } end := int32(len(d.content)) - 8 + e.maxMatchOff off := 8 // First to read for i := e.maxMatchOff + 1; i < end; i++ { cv = cv>>8 | (uint64(d.content[off]) << 56) h := hashLen(cv, bestLongTableBits, bestLongLen) e.dictLongTable[h] = prevEntry{ offset: i, prev: e.dictLongTable[h].offset, } off++ } } e.lastDictID = d.id } // Reset table to initial state copy(e.longTable[:], e.dictLongTable) e.cur = e.maxMatchOff // Reset table to initial state copy(e.table[:], e.dictTable) }